Welcome !
Items in cart: 0  Subtotal: $0.00 		 
 

Search:

  
 

 

Select Product Line
› Bredent
› Visio.lign Veneering System
› XPdent
› Wiedent Acrylic Teeth
› KG Sorensen Diamonds
› ZEO CE Porcelain
Bredent Catalog

XPdent.com is protected by Extended Validation (EV) Certificates, learn more

Secured Online Payments
 
Diatit Multidrill Support
Back to Diatit Multidrill

Instructions

   

Printer Friendly Version   

 

Diatit Multidrill Instructions

   
 

 Diatit Multidrill Instructions
This tool set can be used to position the screwed connector wherever required and according to the available space.
 
 
The center drill is used to drill a dimple where the screw is to be placed.
 
The hole can be drilled through the matrix into the patrix freehand, using a handpiece, or with a milling machine.
 
Finish-drill the core hole in the primary part with the multidrill with depth gauge to the limit stop.
 
The conical recess for the screw head is created with the facing cutter when the primary and secondary parts are assembled.
 
A thread is cut into the primary part with the first tap and the last tap.
 
The titanium screw held by the screwdriver can also be screwed in without difficulty in inaccessible places in the mouth.
 
The head of the screw can be adapted to the anatomy.
 
Back to Top

Dimensions

 
 

Printer Friendly Version   

Product Measurements

 All measurements are in millimeters.
   

  Dimensions Not Available

 

 
 

 

   

   

FAQ

Printer Friendly Version  

  What is the retention sequence of the matrices (females)?
Green is low, Yellow is normal, and red is high retention.
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
XPdent | Bredent | Wiedent Acrylics | Zeo CE Light Porcelain | KG Sorensen Cutting Instruments | Technical Courses | Contact Us

Copyright © XPdent Corporation All Rights Reserved.
12145 SW 131st Avenue Miami, FL 33186 USA
Website Design by XPdent.com