Welcome !
Items in cart: 0  Subtotal: $0.00 		 
 

Search:

  
 

 

Select Product Line
› Bredent
› Visio.lign Veneering System
› XPdent
› Wiedent Acrylic Teeth
› KG Sorensen Diamonds
› ZEO CE Porcelain

XPdent.com is protected by Extended Validation (EV) Certificates, learn more

Secured Online Payments
 
VSS Support
Back to Vario Soft Bar VSS

Instructions

   

Printer Friendly Version   

 

VSS Instructions

   
 

 VSS Instructions
The VSS bar has an integrated mandrel rod. The bar is cut to fit the required gap.
 
 
Shape the bottom of the bar to fit the contours of the tissue and attach to the crowns with wax.
 
Cut the mandel rod off and finish to a smooth surface.
 
After casting, fit and finish to the model. The bar should be polished lightly.
 
The yellow matrix is used for duplicating. All undercuts are blocked out. No wax should remain on the matrix.
 
The duplicate refractory model is created. Bredent investment hardner can be used to strengthen the model.
 
The chrome cobalt framework is waxed over the refractory model. Waxing over the refractory model will create the housing for the attachments.
 
The framework is cast and fitted. A light deplating is usually required to clean and polish the interior of the matrix housings.
 
The yellow matrix is inserted into the framework with the insertion pin.
 
Back to Top

Dimensions

 
 

Printer Friendly Version   

Product Measurements

 All measurements are in millimeters.
   

  Dimensions Not Available

 

 
 

 

   

   

FAQ

Printer Friendly Version  

  What is the retention sequence of the matrices (females)?
Green is low, Yellow is normal, and red is high retention.
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
XPdent | Bredent | Wiedent Acrylics | Zeo CE Light Porcelain | KG Sorensen Cutting Instruments | Technical Courses | Contact Us

Copyright © XPdent Corporation All Rights Reserved.
12145 SW 131st Avenue Miami, FL 33186 USA
Website Design by XPdent.com