Welcome !
Items in cart: 0  Subtotal: $0.00
 
 

Search:

 
 

 

Select Product Line
› Bredent
› Visio.lign Veneering System
› XPdent
› Wiedent Acrylic Teeth
› Locator Attachments
› Fast Protec
› Euronda
› ZEO Porcelain
› Yamahachi PMMA Discs
Bredent Catalog

 

This Web site is secured with a GoDaddy.com Web Server Certificate. Transactions on the site are protected with up to 256-bit Secure Sockets Layer encryption.


 
Exakto-Form Resin
 
 
 
Model resin for accurate reproduction and maximum edge stability.
Information Sheet
MSDS Component A
MSDS Component B
 
Exakto-Form Kit (Kit includes components A + B)
(6 x 50g Component A and 6 x 50g Component b)
Green #52000280 $112.60
Ivory #52000282 $112.60
Yellow #52000284 $112.60
 
Exakto-Form Refill Packages
1 X 50 g Component A      
Green #52000174 $11.50
Ivory #52000176 $11.50
Yellow #52000178 $11.50
       
1 X 50 g Component B #52000173 $15.25
 
 
Bredent Insulating Liquid
125 ml #52000210 $33.30
 
Practical Tip:
If a silicone impression is used with a polyurethane basis, the impressions must be previously sprayed out with Exakto-Form Insulating Liquid (Order #520 002 10) to avoid bonding of the impression and model.

Instructions
 

Prior to mixing, each component must be stirred so that a homogeneous mixture is obtained. Mix the sediment completely. Add component A to component B; empty tin completely. Mix Exakto-Form approximately 30 seconds until a uniform color is obtained. Two tins of Exakto-Form are sufficient to produce 2-3 complete dental arches.
The material can be removed after 30 minutes. Final hardness is achieved after 90 minutes. Then the model can be trimmed. If a base for the model is to be produced with Exakto-Form, the model must first be insulated with Exakto-Form Insulating Liquid. Due to its high edge stability, Exakto-form is perfectly suitable for precision-fit bridge and crown work. Any technique can be used for sawing Exakto-Form models. Adopting a new technique is not required.
If smaller quantities are used, fill component A and B into separate syringes. Pour equal quantities of Exakto-Form into a silicone beaker (approximately 2 ml for one die) and mix to obtain a homogeneous material. Please note, material in syringes must be used within 5 days. Pour Exakto-Form into the impression. The excellent flow properties prevent the formation of bubbles even in impressions with thin edges. The hardened resin can be drilled and trimmed. The stability avoids dimensional changes and guarantees precise models.
 
Technical Support

  Bredent Support Page

  Main Support Page

  MSDS Information

  Need More Help?
  Call Our Technicians
 
Related Products

  GI-Flex Disc

  Master-Pin System

  Master-Sep Plaster    Insulating Liquid

  Diatit Burs

Tips
Practical Tip:
If a silicone impression is used with a polyurethane basis, the impressions must be previously sprayed out with Exakto-Form Insulating Liquid to avoid bonding of the impresion and model.