|
MATERIAL SAFETY DATA SHEET
|
|
Product Name: PLASTER SEALANT AND HARDENER
|
|
Product Code: 550 000 01, 550 000 02
|
| |
| Before using this product, please read and follow these
instructions carefully. |
| |
|
1. Composition/Information on ingredients
|
Product Description/use: Solution of binders in various
solvents.
Hazardous substances:
Name: CAS-No.: Content Hazard symbols Hazard codes
Acetone 67-64-1 70 - 90% by w. F R 11
Ethanol 67-17-5 0 - 30% by w. F R 11 |
| |
|
2. Hazard Identification |
|
Hazard codes: R 11 Highly flammable. |
|
|
|
3. First aid procedures: |
Inhalation: Get plenty of fresh air; in case of complications,
seek medical attention.
Skin contact: Wash with soap and water; in case of irritation, seek
medical attention.
Eye contact: Rinse eyes immediately for 10 to 15 minutes in running
water, then seek medical attention.
Ingestion: Rinse mouth with pure water, do not induce vomiting, seek
medical attention.
Others: Remove soaked clothing immediately. |
| |
|
4. Fire fighting procedures: |
Suitable extinguishing media: CO2, dry chemicals or water-spray.
Unsuitable extinguishing media: High-pressure water jet.
Exposure hazards: Thermal decomposition can lead to the generation
of toxic gases (NO2) and/or fire.
Special equipment: Pressure demand self-contained breathing
apparatus should be provided to fire fighters in buildings. |
| |
|
5. Accidental release procedures: |
Precautions - individuals: Wear suitable protective equipment;
use adequate respiratory equipment, do not allow unprotected persons
to enter the room.
Precautions - environment: Stop leaks as soon as possible and avoid
discharge onto the environment.
Cleaning up spillage: Absorb with mineral fillers (such as sand,
diatomaceous earth, …) and store in a well-sealed, suitable
container. After vaporization of the remaining liquid, clean
thoroughly with plenty of water. |
| |
|
6. Storage and handling: |
Storage: Store in a well-sealed amber glass container.
Do not expose to temperatures over 30º C.
Handling: Provide for good ventilation by local or
general exhaust, clean the container after each use
immediately. |
|
|
|
7. Exposure control/individual protection |
Constituents with limits relevant to the work are:
CAS-No.: Description: Type Value Unit
67-64-1 Acetone MAK 500 ppm
67-17-5 Ethanol MAK 1000 ppm
Individual:
Protection - hands: Protective gloves.
Protection - eyes: Protective glasses are recommended.
Protection - skin: Laboratory coat (cotton).
Protective and hygienic measures: Avoid inhalation as
well as eye and skin contact, do not eat, drink or smoke
while working. After working, wash your hands with soap
and water; observe standard hygiene procedures. |
|
|
|
8. Physical and chemical properties |
Appearance: Clear liquid.
Color: Colorless.
Odor: Typical.
Data relevant to safety:
Boiling point/interval: About 56 C.
Flash point: -18º C.
Ignition point: 465º C.
Self-inflammation: No.
Lower explosion limit: 2.6% by vol. Upper explosion
limit: 13 % by vol.
Vapor pressure (20º C): 160 mbar. |
|
|
|
9. Stability and reactivity: |
Conditions to avoid: Avoid temperatures exceeding 40º C;
avoid contact with heat sources or sources of ignition.
Materials to avoid: Avoid direct contact with strong
oxidants.
Hazardous decomposition products: None on proper
application, thermal decomposition leads to the
generation of toxic gases (NO2, CO2, CO). |
|
|
|
10. Toxicological information: |
Toxicological evaluation: The toxicological properties
have not been fully determined.
Acute toxicity:
LD50/LC50 : Substance Special Kind of exposure
5800 mg/kg Acetone Rat Oral
Irritating properties: Exposure to vapor for a long
period of time may cause headaches, dizziness and
nausea. |
|
|
|
11. Ecological information: |
|
Avoid discharge into the environment. |
|
|
|
12. Disposal consideration: |
Product: This product has to be classified as chemical
waste material and disposed of in agreement with local
and national regulations.
Soiled container: Empty the bottle completely and allow
residues to evaporate in a well-ventilated area. Then
dispose of container in agreement with local and
national regulations. |
|
|
|
13. Export regulation |
Transport:
By land:
ADR/RID/GGVS/GGVE class: 3 No./Letter: 5 b
Warning symbol: F Hazard No.: Material No.: 1263.
By sea:
IMDG/GGVSea class: 3.2 No./Letter: 1263 Page: 3268.
EMS-No.: 3-05 MFAG: 310, 313
Correct technical name: Paint related material.
By air:
ICAO/IATA class: 3 UN/ID No. 1263.
Correct technical name: Paint related material. |
|
|
|
14. Regulatory information: |
Hazard symbol & identification: F Highly flammable.
Hazardous substances: Acetone, ethanol.
Hazard codes: R 11 Highly flammable.
Safety codes: S 9 Store in well-ventilated rooms only.
S 16 Avoid direct contact with sources of ignition - do
not smoke.
S 23 Do not breathe vapor. |
|
|
|
15. Other information |
Data sheet completed by: Research & Development Dept. -
Bredent (Germany).
This Material Safety Data Sheet is provided by way of
guide for the use of our product and is correct to the
best of our knowledge.
However, we can't offer any guarantee as to its accuracy
or exhaustiveness. All chemicals may present unforeseen
risks and should be used with caution.
We cannot guarantee that the risks referred above are
the only risks present. The final choice of the
application of a product is thus the sole responsibility
of the user. |
MSDS
Need More Help?
