Oxide Stop Precious

Prevents polished, precious and semi precious alloy surfaces from oxidizing while being soldered with a flame or in a furnace and while firing porcelain.


Oxide-Stop Precious forms a protective layer during firing which prevents the metal surface from oxidizing.	Oxide-Stop Precious maintains the high luster. No refinishing is required.	Refinishing oxidized surfaces reduces the material and may adversely affect the precision of fit.

Oxide-Stop Precious

Oxide-Stop Precious, 20 ml	#52000650	$47.95
Thinner, 20 ml	#52000670	$30.95
MSDS for Oxide-Stop Precious
MSDS for Thinner

Need More Help?

Chat with a Live Technician

Forums

MATERIAL SAFETY DATA SHEET

Product Name: OXIDE STOP PM RED

Product Code: 520 006 50

Before using this product, please read and follow these instructions carefully.

1. Composition/Information on ingredients

Product Description/use: Varnish with oxide-reducing properties:
Hazardous substances:
Name: CAS-No.: Content Hazard symbol Hazard codes
Xylenes 1330-20-07 15-25% by w. Xn R 10, R 20/21, R 38

2. Hazard Identification Xn Harmful

Hazard codes: R 10 Flammable.
R 20/21 Harmful by inhalation and in contact with skin.
R38 Irritant to skin.

3. First aid procedures:

Inhalation: Plenty of fresh air and in case of complications seek medical assistance.
Skin contact: Wash skin with soap and rinse with plenty of water. In case of irritation, seek medical attention.
Eye contact: Flush immediately with pure water for at least 15 minutes; seek medical attention.
Ingestion: Seek medical attention immediately.
Others: Remove soaked clothing immediately.

4. Fire fighting procedures:

Suitable extinguishing media: Water-spray, CO2, dry chemicals, foam.
Unsuitable extinguishing media: High-pressure water-jet.
Exposure hazards: Thermal decomposition can lead to the generation of irritant vapor and/or fire.
Special equipment: Pressure demand self-contained breathing apparatus should be provided to fire fighters in buildings.

5. Accidental release procedures:

Precautions - individuals: Wear protective equipment, use in well-ventilated area - do not inhale vapor, remove all sources of ignition immediately.
Precautions - environment: Stop leaks as soon as possible and avoid discharge into environment.
Cleaning up spillage: Absorb with mineral fillers (such as sand, diatomaceous earth, …) and store in a well sealed, suitable container.

6. Storage and handling:

Storage: Store in a well-sealed container in well ventilated rooms only.
Conditions to be avoided: Do not expose to temperatures exceeding 30º C; store away from food.
Handling: Do not breathe vapor; keep away from sources of ignition - no smoking. After using, close the bottle immediately.

7. Exposure control/individual protection:

Constituents with limits relevant to work area:
CAS No. Description Type Value Unit
1330-20-7 Xylene MAK 100 ppm
Individual:
Protection-hands: Protective gloves.
Protection-eyes: Protective glasses.
Protection-skin: Working coat (cotton).
General procedures with respect to individual hygiene: Do not eat, drink or smoke while working. After working, wash your hands with soap and rinse with water thoroughly.

8. Physical and chemical properties:

Appearance: Liquid.
Color: Reddish.
Odor: Typical.
Data relevant to safety:
Boiling point/interval: 135 C.
Flash point: 23-27º C.
Ignition point: > 400º C.
Self-Inflammation: None.
Lower explosion limit: 1% by vol. Upper explosion limit: 8% by vol.
Vapor pressure (20º C): 7-8 mbar.

9. Stability and reactivity:

Conditions to avoid: Do not expose to temperatures exceeding 30º C.
Materials to avoid: Avoid direct contact to strong oxidants or alkali.
Hazardous decomposition products: Thermal decomposition leads to the generation of irritant vapor.

10. Toxicological information:

Toxicological evaluation: The toxicological properties have not been fully determined.
Acute toxicity:
LD50/LC50: Substance Species Kind of exposure
4.3 g/kg Xylene Rat Oral
Irritating properties: Irritating to skin.
Sensitization: None have been reported yet.
Carcinogenic, teratogenic or mutagenic effects: None have been reported yet.

11. Ecological information:

Avoid discharge into the environment.

12. Disposal consideration:

Product/Soiled Container: Both have to be classified as chemical waste material and disposed in agreement with your local and national regulations.

13. Export regulation

By land:
ADR/RID/GGVS/GGVE class: 3 No./Letter: 31.c)
Warning symbol: 3 Hazard No.: 30 Material No.: 1307
By air:
ICAO/IATA class: 3 UN/ID No.: 1307 Verp. Grp.: III/309
Correct technical name: Xylenes

14. Regulatory information:

Hazard symbol & identification: Xn = Harmful.
Hazardous substances: Xylene.
Hazard codes: R 10 Flammable.
R 20/21 Harmful by inhalation and in contact with skin.
R 38 Irritant to skin.
Safety codes: S 23 Do not breathe vapor.
S 24/25 Avoid contact with eyes or skin.

15. Other information

Data sheet completed by: Research & Development Dept. - Bredent (Germany).
This Material Safety Data Sheet is provided by way of guide for the use of our product and is correct to the best of our knowledge.
However, we can't offer any guarantee as to its accuracy or exhaustiveness. All chemicals may present unforeseen risks and should be used with caution.
We cannot guarantee that the risks referred above are the only risks present. The final choice of the application of a product is thus the sole responsibility of the user.

MATERIAL SAFETY DATA SHEET

Product Name: THINNER FOR OXIDE STOP PM

Product Code: 520 006 70

Before using this product, please read and follow these instructions carefully.

1. Composition/Information on ingredients

Product Description/use: Thinner.
Hazardous substances:
Name: CAS-No.: Content Hazard symbol Hazard codes
Xylenes 1330-20-7 15-25% by w. Xn R 10, R 20/21, R 38

2. Hazard Identification Xn Harmful

Hazard codes: R 10 Flammable.
R 20/21 Harmful by inhalation and in contact with skin.
R38 Irritant to skin.

3. First aid procedures:

Inhalation: Plenty of fresh air, rest the injured person softly, seek medical assistance.
Skin contact: Wash skin with soap and rinse with water. In case of irritation, seek medical attention.
Eye contact: Flush immediately with pure water for at least 15 minutes; seek medical attention.
Ingestion: Seek medical attention immediately.
Others: Remove soaked clothing immediately.

4. Fire fighting procedures:

5. Accidental release procedures:

6. Storage and handling:

7. Exposure control/individual protection:

Constituents with limits relevant to work area:
CAS No. Description Type Value Unit
1330-20-7 Xylenes MAK 100 ppm
Individual:
Protection-hands: Protective gloves.
Protection-eyes: Protective glasses.
Protection-skin: Working coat (cotton).
General procedures with respect to individual hygiene: Do not eat, drink or smoke while working. After working, wash your hands with soap and rinse with water thoroughly.

8. Physical and chemical properties:

Appearance: Clear liquid.
Color: Red.
Odor: Typical.
Data relevant to safety:
Boiling point/interval: 140 C.
Flash point: 23-27º C.
Ignition point: > 460º C.
Self-Inflammation: None.
Lower explosion limit: 1% by vol. Upper explosion limit: 8% by vol.
Vapor pressure (20º C): 7-8 mbar.

9. Stability and reactivity:

Conditions to avoid: Do not expose to temperatures exceeding 30º C. Keep away from sources of ignition - do not smoke.
Materials to avoid: Avoid direct contact to strong oxidants or alkali.
Hazardous decomposition products: Thermal decomposition leads to the generation of irritant vapor.

10. Toxicological information:

Toxicological evaluation: The toxicological properties have not been fully determined.
Acute toxicity:
LD50/LC50: Substance Species Kind of exposure
4300 mg/kg Xylene Rat Oral
Irritating properties: Irritating to skin.
Sensitization: None have been reported yet.
Carcinogenic, teratogenic or mutagenic effects: None have been reported yet.

11. Ecological information:

Avoid discharge into the environment.

12. Disposal consideration:

Product: This product has to be classified as chemical waste material and disposed in agreement with your local and national regulations.
Soiled container: Empty the bottle entirely and allow residues to evaporate in a well-ventilated area. Then dispose of the container in agreement with your local and national regulations.

13. Export regulation

By land:
ADR/RID/GGVS/GGVE class: 3 No./Letter: 31.c)
Warning symbol: 3 Material No.: 1307
By air:
ICAO/IATA class: 3 UN/ID No.: 1307 Verp. Grp.: III/309
Correct technical name: Xylenes

14. Regulatory information:

Hazard symbol & identification: Xn = Harmful.
Hazardous substances: Xylenes.
Hazard codes: R 10 Flammable.
R 20/21 Harmful by inhalation and in contact with skin.
R 38 Irritant to skin.
Safety codes: S 23 Do not breathe vapor.
S 24/25 Avoid contact with eyes or skin.

15. Other information

MATERIAL SAFETY DATA SHEET

Product Name: OXIDE STOP FOR SILVER PALLADIUM ALLOYS

Product Code: 520 003 30

Before using this product, please read and follow these instructions carefully.

1. Composition/Information on ingredients

Product Description/use: Solution of binders and special chemicals in solvents.
Hazardous substances:
Name: CAS-No.: Content Hazard symbol Hazard codes
Methanol 67-56-1 >80% by w. F, T R 11, R 23/25

2. Hazard Identification Xn Harmful

T Toxic
Hazard codes: R 11 Highly flammable.
R 23/25 Toxic if inhaled or swallowed.

3. First aid procedures:

Inhalation: Plenty of fresh air, keep still and warm; seek medical attention immediately.
Skin contact: Wash skin with soap and rinse with water thoroughly.
Eye contact: Flush immediately with pure water for at least 15 minutes; seek medical attention.
Ingestion: Drink a lot of water immediately and induce vomiting if person is conscious. Seek medical attention immediately!
Others: Remove soaked clothing immediately.

4. Fire fighting procedures:

5. Accidental release procedures:

Precautions - individuals: Avoid contact with eyes or skin; do not breathe vapor. Remove all sources of ignition and do not allow unprotected persons to enter the room.
Precautions - environment: Stop leaks as soon as possible and avoid discharge into environment.
Cleaning up spillage: Absorb with mineral fillers (such as sand, diatomaceous earth) and store in a well sealed, suitable container.

6. Storage and handling:

Storage: Store in a well-sealed container at temperatures not exceeding 30º C.
Conditions that should be avoided: Store away from food.
Handling: Do not breathe vapor; use in well ventilated areas and close bottle after each use immediately. Avoid contact to eyes and skin. Keep away from sources of ignition - no smoking.

7. Exposure control/individual protection:

Constituents with limits relevant to work area:
CAS No. Description Type Value Unit
67-56-1 Methanol MAK 200 ppm
Individual:
Protection-hands: Protective gloves.
Protection-eyes: Protective glasses.
Protection-skin: Working coat (cotton).
General procedures with respect to individual hygiene: Do not eat, drink or smoke while working. After working, wash your hands with soap and rinse with water thoroughly.

8. Physical and chemical properties:

Appearance: Liquid.
Color: Colorless.
Odor: Typical.
Acidity (pH, % by weight in water): 6. 5 - 7.5
Data relevant to safety:
Boiling point/interval: 65 C.
Flash point: 11º C.
Ignition point: 455º C.
Self-Inflammation: None.
Lower explosion limit: 5.5% by vol. Upper explosion limit: 26.5% by vol.
Vapor pressure (20º C): 128 mbar.
Specific density: 0.79 g/ml.
Solubility in water (20º C; % by weight): Soluble.

9. Stability and reactivity:

Conditions to avoid: Temperatures exceeding 30º C.
Materials to avoid: Strong oxidants.
Hazardous decomposition products: Thermal decomposition can lead to the generation of irritant and toxic vapor and gases (methanol, CO …).

10. Toxicological information:

Acute toxicity:
LD50/LC50: Substance Species Kind of exposure
100-250 ml. Methanol Human Oral
Toxicological properties: Toxic if inhaled or may cause blindness; inhalation of vapors may cause dizziness or losing consciousness. Harmful to liver and kidney.

11. Ecological information:

Avoid discharge into the environment.

12. Disposal consideration:

Product/Soiled Container: Both have to be classified as chemical waste material and disposed in agreement with your local and national regulations.

13. Export regulation

By land:
ADR/RID/GGVS/GGVE class: 3 No./Letter: 5 b)
Warning symbol: F, T Hazard No.: Material No.: 1263
By sea:
IMDG/GGVSea class: 3.2 UN No.: 1263 Page: 3268
EMS No: 3-05 MFAG: 310, 313
Correct technical name: Paint related material.
By air:
ICAO/IATA class: 3.2 UN/ID No.: 1263 Verp. Grp.: II
Correct technical name: Paint related material.

14. Regulatory information:

Hazard symbol & identification: F = Highly flammable.
T = Toxic
Hazardous substances: Methanol.
Hazard codes: R 11 Highly flammable.
R 23/25 Toxic if inhaled or and if swallowed.
Safety codes: S 2 Keep out of reach of children.
S 7 Keep container tightly sealed.
S 16 Keep away from sources of ignition - no smoking.
S 24 Avoid contact with skin.

15. Other information

	XPdent \| Bredent \| Wiedent Acrylics \| Zeo CE Light Porcelain \| KG Sorensen Cutting Instruments \| Technical Courses \| Contact Us
Copyright © XPdent Corporation All Rights Reserved. 12145 SW 131st Avenue Miami, FL 33186 USA Website Design by XPdent.com