|
MATERIAL SAFETY DATA SHEET
|
|
Product Name: PLASTER COATING SOLUTION
|
|
Product Code: 540 001 35
|
| |
| Before using this product, please read and follow these
instructions carefully. |
| |
|
1. Composition/Information on ingredients
|
| Product Description/Use: Mixture of salts and natural binders in
aqueous solution. |
| |
|
2. Hazard Identification |
|
Hazard codes: According to "GefStoffV", this product is
not classified as a hazardous substance. Nevertheless,
direct contact may cause irritation of the eyes in some
cases. |
|
|
|
3. First aid procedures: |
Inhalation: Get plenty of fresh air; in case of complications,
seek medical attention.
Skin contact: Wash skin with soap and plenty of water; in case of
irritation, seek medical attention.
Eye contact: Flush with pure water for at least 15 minutes
immediately; then seek medical attention.
Ingestion: Drink plenty of water; seek medical attention
immediately.
Others: Remove soaked clothing immediately. |
| |
|
4. Fire fighting procedures: |
Suitable extinguishing media: This product is not flammable.
Exposure hazards: High temperatures lead to the generation of
irritant vapor.
Special equipment: Pressure demand self-contained breathing
apparatus be provided to fire fighters. |
| |
|
5. Accidental release procedures: |
Precautions - individuals: Wear protective equipment.
Precautions - environment: Stop leaks as soon as possible and avoid
discharge into environment.
Cleaning up spillage: Absorb with mineral filler (such as sand,
diatomaceous earth … ), collect and store in a suitable container. |
| |
|
6. Storage and handling: |
Storage: Store in a well-sealed container. Do not expose
to temperatures below 5º C or exceeding 30º C, store
away from food.
Handling: Avoid direct contact with eyes, close bottle
after use. |
|
|
|
7. Exposure control/individual protection: |
Individual:
Protection - hands: None.
Protection - eyes: Protective glasses are recommended.
Protection - body: Working coat (cotton).
General procedures with respect to individual hygiene:
Do not eat, drink or smoke when working. After working,
wash your hands with soap and rise with water. |
|
|
|
8. Physical and chemical properties: |
Appearance: Clear liquid.
Color: Reddish.
Odor: Typical.
Acidity (pH, % by weight in water): 6.5 - 7.5.
Data relevant to safety:
Boiling point/interval: About 100º C.
Vapor pressure (20º C): 23 hPa.
Specific density (20º C): 1.0 g/ml.
Solubility in water (20º C; % by weight): Soluble mg/l. |
|
|
|
9. Stability and reactivity: |
|
Conditions to avoid: Avoid temperatures below 5º C. |
|
|
|
10. Toxicological information: |
Toxicological evaluation: The toxicological properties
of this product have not been determined.
Irritating properties: Irritation of the eyes may occur
in rare cases after direct contact.
Sensitization: None have been reported yet.
Carcinogenic teratogenic or mutagenic effects: None have
been reported yet. |
|
|
|
11. Ecological information: |
|
Avoid discharge into the environment. |
|
|
|
12. Disposal consideration: |
Product: This product has to be classified as chemical
waste material and disposed of in agreement with local
and national regulations.
Soiled Container: Empty the bottle entirely, rinse with
plenty of water and dispose of in agreement with local
and national regulations. |
|
|
|
13. Export regulation |
|
Transport: Non-regulated. |
|
|
|
14. Regulatory information: |
Hazard symbol and identification: According to "GefStoffV",
this product is not classified as a hazardous substance.
Safety Codes: S 2 Keep out of reach of children. |
|
|
|
15. Other information |
Data sheet completed by: Research & Development
Department - Bredent (Germany).
This Material Safety Data Sheet is provided by way of
guide to the use of our product and is correct to the
best of our knowledge.
However, we can't offer any guarantee as to its accuracy
or exhaustiveness. All chemicals may present unforeseen
risks and should be used with caution.
We cannot guarantee that the risks referred above are
the only risks present. The final choice of the
application of a product is thus the sole responsibility
of the user. |
MSDS
Need More Help?
