Welcome !
Items in cart: 0  Subtotal: $0.00
 
 

Search:

 
 

 

Select Product Line
› Bredent
› Visio.lign Veneering System
› XPdent
› Wiedent Acrylic Teeth
› Locator Attachments
› Fast Protec
› Euronda
› ZEO Porcelain
› Yamahachi PMMA Discs
Bredent Catalog

 

This Web site is secured with a GoDaddy.com Web Server Certificate. Transactions on the site are protected with up to 256-bit Secure Sockets Layer encryption.


 
Pi-ku-plast HP 36 Precision Pattern Resin

Optimum contouring properties, will not slump. Available in 5 different transparent colors to allow the thickness to be checked and to contract well within the wax. When used with the Pi-Ku-Plast separating agent, resin inner copings can be base for producing milled restorations. Ideal for connecting bar sections for soldering.

Due to the multigrain design, Pi-Ku-Plast absorbs less monomer and therefore has less shrinkage. Various grain sizes shift into the gaps of each other for a compact, sturdy application. The burnout is clean and complete. In burnout, Pi-Ku-Plast does not expand but collapses. This puts no internal stress in the casting ring, resulting in a clean, stress-free casting.
 

Pikuplast Dip System:
  Control viscosity, Save material, Save time, Save money

Wet the brush with the Pi-Ku-Plast monomer. The amount and firmness of the portion can be controlled by the amount of monomer on the brush and the time it is immersed in the polymer. Because the material does not have to be pre-mixed, no resin is wasted due to over mixing the two components. After using, the brush is cleaned in the cleaner and the vessels are covered to keep the Pi-Ku-Plast in good working condition. Dip the flat side of the brush into the polymer to take up large portions.
Dip the narrow side of the brush into the polymer to take up small portions.
Dip only the brush tip into the polymer to take up very small portions.

Products

Pi-Ku-Plast HP36 Assortment Kit
  Blue Kit #54000219 $235.00

  Yellow Kit #54000217 $235.00
  Orange Kit #54000218 $235.00
  Red Kit #54000220 $235.00
  Transparent Kit #54000216 $235.00
Pi-Ku-Plast Information Sheet 
Info Polymer  Info Cleaner
 

*The Pi-Ku-Plast Assortment Kit Includes the following items

100 ml Monomer
100 ml Cleaner
85 g Polymer
1 Brush size A
1 Brush size B
1 Brush holder
3 Vessels
 
 
 

Refill Package

 
Blue Monomer 100 ml #54000213 $55.00 
Yellow Monomer 100 ml #54000211 $55.00 
Orange Monomer 100 ml #54000212 $55.00 
Red Monomer 100 ml #54000214 $55.00 
Transparent Monomer 100 ml #54000210 $55.00 
Polymer 85g #54000215 $99.50 
Cleaner 100 ml #54000224 $58.00 
Vessel for Cleaner 8 ml #54000209 $17.50 
Vessel for Monomer 8 ml #54000207 $17.50 
Vessel for Polymer 8 ml #54000208 $17.50 
3 brushes, Size A + holder #33001146 $29.35 
3 brushes, Size B + holder #33001147 $29.35 
Separating Agent 10 ml #54000182 $33.30 
   
Optimal control of layer thickness thanks to the transparent colors of Pi-Ku-Plast HP36
Thanks to the smooth, high-lustrous reproduction of the metal surface of the primary element, a perfect inner surface of the secondary crown is obtained. By using Pi-Ku-Plast Separating Agent, Order No. 540 001 82, for the first time ever, resin primary elements can be produced on varnish-coated dies. This is the perfect basis for milled restorations. Entirely gap-free fit of the Pi-Ku-Plast outer coping allows perfect precision of the secondary elements. Implant bars can be secured in place rigidly with optimal dimensional stability
   

Pi-Ku-Plast HP 36:
  For accurate, stable and millable resin dies and frameworks

The competitor’s resin and Pi-Ku-Plast HP in the incineration test. At 275°C the competitor’s product foams and expands considerably. At 300°C the competitor’s product reveals distinctive expansion whereas Pi-Ku-Plast reduces in volume.  
Identical copings produced with brush resin. The competitor’s resin and Pi-Ku-Plast HP 36, prepared for investing. The considerable expansion of the competitor’s resin during the incineration phase resulted in the fracture of the investment material die in the casting ring. After casting, the crown is sealed with a lid and cannot be used. A section through the cast crown shows the fractured die.
Through friction heat during grinding and high heat sensitivity, the plasticity phase of the competitor’s resin can be reached. Deformation of the model, rough grinding surfaces, and inadequate fit may result. Pi-Ku-Plast features dimensional stability; during grinding fine shavings are obtained and a smooth grinding surface is ensured. Allow the wax element to cool down to obtain a tension free bridge model. Separate using a thin blade and connect using Pi-Ku-Plast HP 36. The extremely low shrinkage of Pi-Ku-Plast allows to obtain a tension free model and precision fit casting.
 
 
Technical Support

  Bredent Support Page

  Main Support Page

  MSDS Information

  Need More Help?
  Call Our Technicians

  Chat with a Live Technician

  Forum

 
Related Products

  Locking Pin

  Security Lock

  SG Bar Patrix

  VSS Bar

  VSP Bar

  Wax Milling Burs

  Milling Machine

  Separating Agents