Welcome !
Items in cart: 0  Subtotal: $0.00
 
 

Search:

 
 

 

Select Product Line
› Bredent
› Visio.lign Veneering System
› XPdent
› Wiedent Acrylic Teeth
› Locator Attachments
› Fast Protec
› Euronda
› ZEO Porcelain
› Yamahachi PMMA Discs
Bredent Catalog

 

This Web site is secured with a GoDaddy.com Web Server Certificate. Transactions on the site are protected with up to 256-bit Secure Sockets Layer encryption.

 
 




The Chipping Repair Kit For Dentists

includes the following items:

1 x MKZ Primer
1 x MKZ EM Activator
1 x K Primer
1 x VisioLink PMMA & Composite Primer
1 x CreaLign Incisal E1
1 x CreaLign Dentin A1
1 x CreaLign Dentin A2
1 x CreaLign Paste Dentin A1
1 x CreaLign Paste Dentin A2
1 x ComboLign Opaquer 1
1 x ComboLign Opaquer 2
1 x ComboLign Opaquer Z
10 x Application Cannulas
12 x Plastic Bowls

*Chipping Repair Kit is also available in A2 & A3 Shades.
 
SKU# CLIGNSETA $1,117.15
 



The Chipping Repair Kit For Technichians

includes the following items:

1 x MKZ Primer
1 x MKZ EM Activator
1 x K Primer
1 x VisioLink PMMA & Composite Primer
12 x Plastic Bowls
 
SKU# CLIGNSETT1 $710.00
 

Instructions:

1.Chipping within the ceramic veneer ( no substructure material )
  • Remove contamination on the surface (plaque accumulation/discoloration)
  • Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
  • Apply K-Primer generously, the surface may appear wet.
  • Wait approximately 15 seconds until the surface is dry.
  • Apply the matching shade of Crea.Lign [Dentin/Incisal]
  • Remove inhibition layer [e.g with alcohol]
  • Polish the repaired area in two steps [prepolishing and high gloss polishing]
2.Chipping down to the substructure material (the substructure is visible)
  • Remove contamination on the surface [plaque accumulation/discoloration].
  • Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
  • IF the opaquer has remained on the substructure, do not remove it and roughen it as well.
  • Apply copious amount of MKZ Primer to the metal and Opaquer Z can be used for colored zirconium substructures. Then polymerize with a halogen or LED lamp.
  • Apply the matching shade of Crea.Lign Dentin and Incisal using intermediate polymerization of the various layers.
  • Remove inhibition layer [e.g. with alcohol]
  • Polish the repaired area in two steps [prepolishing and high gloss polishing]

In cases of chipping down to the substructure, MKZ EM-Aktivator needs to be mixed with MKZ Primer (1:1) and applied to the metal and the adjacent ceramic.