| |
|
 |
How to Fabricate an Overcasting over Existing Implant Bar Course |
|
Course Outline
Type of Workshop: slide presentation and hands on
Length of program: 2 days
Tuition Fee: $695.00 US
Location: XPdent/Bredent training Facility in Miami,
Florida
CDT Credits: 14
Recommended participants:
• general crown & bridge technicians
• implant technicians
• partial denture technicians
Attendance: 8
| Each participant will take with them: (an approximate value
of $400.00) |
|
1 implant model with 4 analogs
4 screws
1 metal bar w/ 4 SG patrices
4 SG 2.2mm matrices
1 metal overcasting (cast during the course)
1 refractory model
|
|
|
|
Course Description |
This course is designed for technicians who would like to learn how
to fabricate an implant overdenture superstructure also known as an
overcasting. Traditionally, these types of castings are done by
laboratories that specialize in implants, attachments and/or removable
partial denture frames. Due to an overwhelming amount of inquiries on
this type of work by our customers; Bredent USA would like to present
simple techniques on how to fabricate overcastings. Laboratories of all
sizes and specialties can benefit from fabricating this precision work
without investing in costly equipment irrelevant to their specialty.
This is an excellent way to eliminate the stress that often accompanies
subletting this type of work to other laboratories. There are two simple
techniques in fabricating a precision overcasting: one is the lift off
version which is applied with our pikuplast pattern resin directly onto
the relieved implant bar with all attachment components on the master
model. Two is the refractory method in which the relieved implant bar
with all attachment components in place is duplicated using a quality
silicone duplicating material. Once the mold has set, any popular
investment can be poured in to make the refractory model. After the
refractory model has set and completely dried, wax is applied over the
refractory version of the relieved implant bar and any of its attachment
components. Any of these two techniques can be easily done by a
laboratory that casts regularly.
Each participant will obtain a course booklet, accreditation from the
National Board for Certification (6 hours per day) and a course
certificate. |
| |
*Only 6 participants per class,
so reserve your seat ASAP! |
To reserve your seat please contact Sales Department at 800·328·3965
x 501. Any reservations that remain unpaid 30 days prior
to the course will be cancelled. Seats will be reserved
on a first come, first serve basis. Courses must be paid
in full with a Visa, Mastercard, American Express, or Discover
Credit Card (payment must be received 30 days before the
course date). Any payments made for this course become Non-Refundable
within 30 days of the course date. Bredent USA reserves
the right to cancel or reschedule any training course. In
such event, deposits will be refunded in full or transferred
to a future course. XPdent is not responsible for airfare,
lodging or other related expenses.
|
|
|
|
|
|
