| |
|
|
|
 |
Technical
Support |
|
|
|
|
|
Related Products |
|
|
|
|
|
Tips |
|
 Practical
Tip: |
|
If a silicone impression is used with a
polyurethane basis, the impressions must be previously sprayed out with Bredent
Insulating Liquid to avoid bonding of the impression and model. |
|
|
|
For Metal
 |
 |
Rodeo |
|
|
|
 |
 |
|
|
|
|
Made from specially selected tail hairs from wild horses,
which vary in hardness between black bristles and goat hair bristles; they are
specially suitable for pre-polishing soft alloys. |
|
|
|
15 Piece Set |
|
18 mm Ø |
#350 009 60 |
$44.50 |
|
|
21 mm Ø |
#350 009 70 |
$44.50 |
|
|
|
|
|
|
|
Pen-Shaped Brushes |
|
Fabric Buff, Coated |
|
 |
 |
|
 |
 |
|
When used with Abraso Star K80 (page 139), these pen-shaped brushes facilitate polishing areas which are difficult to get at, e.g. the inner surfaces of telescopic crowns. |
|
Fabric discs impregnated with polishing paste polish smoother. This saves time because no polishing paste has to be applied. |
|
15 Piece Set |
|
2 mm Ø |
#350 004 30 |
Out of Stock |
|
4 mm Ø |
#350 004 10 |
$22.50 |
|
|
|
|
|
|
|
Abraso-Fix |
| Fine abrasive particles integrated into the bristles enable all dental materials to be pre-polished without using polishing paste.
|
|
|
|
|
|
|
Red-Fine Pen-Shaped & Round Brushes |
|
Yellow-Extrafine Pen-Shaped & Round Brushes |
|
 |
|
|
|
The soft abrasiveness makes it possible for an exact high
luster finish even on secondary attachments. For: Precious and semi-precious
metals. |
|
The fine polishing particles create an optimum pre-high
luster on all facing acrylics in the shortest possible times. For: Composites
and acrylics. |
|
Pen-Shaped Brush |
|
4 mm/2 Units |
#350 004 60 |
Out of Stock |
|
4 mm/8 Units |
#350 007 60 |
Out of Stock |
|
|
|
Pen-Shaped Brush |
|
4 mm/2 Units |
#350 004 50 |
Out of Stock |
|
4 mm/8 Units |
#350 007 59 |
$59.50 |
|
|
|
|
|
|
|
|
|
|
|
|
|
For Acrylic
 |
|
|
|
|
|
Acrylic Finishing Set |
Abrasive finishing and accurate polishing right up to a
brilliant high luster quickly and easily - especially in
areas which are difficult to get at, such as on
orthodontic appliances.
|
|
|
Acrylic Finishing Kit |
|
1 Tungsten carbide cutter (D
263 KG 60)
1 Tungsten carbide cutter (D 200 KF 23)
1 Acrylic polisher, coarse, green
1 Acrylic polisher, medium, gray
1 Acrylic polisher, fine, red |
|
|
#350 009 92 |
$101.50 |
|
|
|
The Diatit coated cutter is
especially long lasting and more cost-effective than
ever before. The three different abrasive grits provide
for accurate polishing right up to a brilliant high
luster. |
|
|
 |
 |
|
 |
 |
|
Pressure can be exerted as necessary with the Tungsten carbide cutter to reduce
the material as required. |
The green, coarse polisher removes all traces of the carbide cutter finishing
effortlessly. |
|
The gray, medium polisher polishes slightly abrasively and pre-polishes in one
stage. |
The red, high luster polisher creates an excellent high shine on all acrylics in
an extremely short time. |
|
Shows the polished surface. A brilliant high luster with no
scratches. |
|
|
|
|
|
|
|
|
High Shine
 |
|
|
|
|
|
Fabric Buff |
|
15 pieces Metal /Acrylic |
|
22 mmØ |
#350 006 70 |
Out of Stock
|
|
|
|
|
|
|
Pen-shaped Brushes |
|
 |
 |
|
The soft goat hairs create a high luster in outer crowns which is gentle to the surface and produces optimum friction. |
|
|
|
|
|
Acrylic Finishing Set |
Abrasive finishing and accurate polishing right up to a
brilliant high luster quickly and easily - especially in
areas which are difficult to get at, such as on
orthodontic appliances.
|
|
|
Acrylic Finishing Kit |
|
1 Tungsten carbide cutter (D
263 KG 60)
1 Tungsten carbide cutter (D 200 KF 23)
1 Acrylic polisher, coarse, green
1 Acrylic polisher, medium, gray
1 Acrylic polisher, fine, red |
|
|
#350 009 92 |
$101.50 |
|
|
|
The Diatit coated cutter is
especially long lasting and more cost-effective than
ever before. The three different abrasive grits provide
for accurate polishing right up to a brilliant high
luster. |
|
|
|
|
|
|
|
|
|
Pressure can be exerted as necessary with the Tungsten carbide cutter to reduce
the material as required. |
The green, coarse polisher removes all traces of the carbide cutter finishing
effortlessly. |
|
The gray, medium polisher polishes slightly abrasively and pre-polishes in one
stage. |
The red, high luster polisher creates an excellent high shine on all acrylics in
an extremely short time. |
|
Shows the polished surface. A brilliant high luster with no
scratches. |
|
|
|
|
|
|
|
|
For Porcelain
 |
|
|
|
Silicone Polishers for Ceramic |
 |
The three grades of the Ceragum
Ceramic Polishers are best used in combination with each other.
With this assortment you can finish any rough ceramic surface to
a highshine in an extremely short time.
|
Ceragum Coarse
The coarse Ceragum has a high abrasive that quickly
removes scratches from grinding diamonds. |
|
|
|
|
 |
|
|
|
|
|
Ceragum Medium
The medium Ceragum removes the scratches from the coarse
Ceragum and prepares the porcelain for the highshine. |
|
|
|
|
 |
|
|
|
|
|
Ceragum Fine
The fine Ceragum has an extra-fine texture. After the
porcelain is prepared with the medium Ceragum, very
little time is required to create a highshine with the
fine Ceragum. |
|
|
 |
 |
 |
|
|
Cylinder 19 x Ø 6 mm |
Disc 4 x Ø 22 mm |
Wheel 4 x Ø 22 mm |
|
Qty./Price |
Item Number |
Item Number |
Item Number |
|
12/$12.00 |
PWK
F061 2 |
Out |
PLK F221 2 |
Out
|
PRK
F221 2 |
Out |
| | | | | |
Need More Help?
