CREA LIGN SET w/ SYRINGE HOLDER

CREA LIGN SET w/ SYRINGE HOLDER

CREA LIGN VENEERING SYSTEM PASTE & GEL, COMPLETE SET

CREA LIGN VENEERING SYSTEM PASTE & GEL, COMPLETE SET

CHIPPING REPAIR KIT

Chipping cases
 Easily  & Simply repaired

• Primer can be used in combination with all prosthetic materials
• crea.lign Incisal and Dentin materials (in A2 and A3 for masking 80 % of all cases)
• Just one Chipping Repair Kit for 100 treatments
•  No hydrofluoric acid required
• includes crea.lign composites in the shades A2/A3 including 4 primers and consumables

$1,307.30
Availability: Out of stock
SKU
CLIGNSETA
  • Buy 6 for $1,176.57 each and save 10%
  • Buy 12 for $1,111.21 each and save 15%
  • Buy 24 for $1,045.84 each and save 20%

Chipping cases - Easily  & Simply repaired

• Primer can be used in combination with all prosthetic materials
• crea.lign Incisal and Dentin materials (in A2 and A3 for masking 80 % of all cases)
• Just one Chipping Repair Kit for 100 treatments
•  No hydrofluoric acid required
• includes crea.lign composites in the shades A2/A3 including 4 primers and consumables

includes the following items:

  • 1 x CreaLign Paste Dentin A1
  • 1 x CreaLign Paste Dentin A2
  • 1 x ComboLign Opaquer 1
  • 1 x ComboLign Opaquer 2
  • 1 x ComboLign Opaquer Z
  • 10 x Application Cannulas
  • 12 x Plastic Bowls
  • 1 x MKZ Primer
  • 1 x MKZ EM Activator
  • 1 x K Primer
  • 1 x VisioLink PMMA & Composite Primer
  • 1 x CreaLign Incisal E1
  • 1 x CreaLign Dentin A1
  • 1 x CreaLign Dentin A2

Instructions:

1.Chipping within the ceramic veneer ( no substructure material )

  1. Remove contamination on the surface (plaque accumulation/discoloration)
  2. Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
  3. Apply K-Primer generously, the surface may appear wet.
  4. Wait approximately 15 seconds until the surface is dry.
  5. Apply the matching shade of Crea.Lign [Dentin/Incisal]
  6. Remove inhibition layer [e.g with alcohol]
  7. Polish the repaired area in two steps [prepolishing and high gloss polishing]

2. Chipping down to the substructure material (the substructure is visible)

  1. Remove contamination on the surface [plaque accumulation/discoloration].
  2. Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
  3. IF the opaquer has remained on the substructure, do not remove it and roughen it as well.
  4. Apply a copious amount of MKZ Primer to the metal and Opaquer Z can be used for colored zirconium substructures. Then polymerize with a halogen or LED lamp.
  5. Apply the matching shade of Crea.Lign Dentin and Incisal using intermediate polymerization of the various layers.
  6. Remove inhibition layer [e.g. with alcohol]
  7. Polish the repaired area in two steps [prepolishing and high gloss polishing]

In cases of chipping down to the substructure, MKZ EM-Aktivator needs to be mixed with MKZ Primer (1:1) and applied to the metal and the adjacent ceramic.

More Information
Unite of Measure PCS
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account