We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
CHIPPING REPAIR KIT - DENTAL TECHNOLOGY
Includes the following items:
- 1 x MKZ Primer
- 1 x MKZ EM Activator
- 1 x K Primer
- 1 x VisioLink PMMA & Composite Primer
- 12 x Plastic Bowls
$712.90
Availability:
In stock
SKU
CLIGNSETT1
- Buy 6 for $641.61 each and save 10%
- Buy 12 for $605.97 each and save 15%
- Buy 24 for $570.32 each and save 20%
Includes the following items:
- 12 x Plastic Bowls
- 1 x MKZ Primer
- 1 x MKZ EM Activator
- 1 x K Primer
- 1 x VisioLink PMMA & Composite Primer
Instructions:
1.Chipping within the ceramic veneer ( no substructure material )
- Remove contamination on the surface (plaque accumulation/discoloration)
- Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
- Apply K-Primer generously, the surface may appear wet.
- Wait approximately 15 seconds until the surface is dry.
- Apply the matching shade of Crea.Lign [Dentin/Incisal]
- Remove inhibition layer [e.g with alcohol]
- Polish the repaired area in two steps [prepolishing and high gloss polishing]
2. Chipping down to the substructure material (the substructure is visible)
- Remove contamination on the surface [plaque accumulation/discoloration].
- Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
- IF the opaquer has remained on the substructure, do not remove it and roughen it as well.
- Apply a copious amount of MKZ Primer to the metal and Opaquer Z can be used for colored zirconium substructures. Then polymerize with a halogen or LED lamp.
- Apply the matching shade of Crea.Lign Dentin and Incisal using intermediate polymerization of the various layers.
- Remove inhibition layer [e.g. with alcohol]
- Polish the repaired area in two steps [prepolishing and high gloss polishing]
In cases of chipping down to the substructure, MKZ EM-Aktivator needs to be mixed with MKZ Primer (1:1) and applied to the metal and the adjacent ceramic.
| Unite of Measure | PCS |
|---|
Write Your Own Review
Free Ground Shipping on all Online Orders over $150
30 Days Return & Refund Policy
Online Support
