PAINTABLE SURFACES:

Our attention to style allows the customization of the furnishings through the proposal of a wide color scale. All the paints are made with epoxy powders that protect the furnishings from a possible formation of rust. The metal surfaces are lacquered with epoxy powders hot cured 180 °. The polymerized film is 60 microns for glossy surfaces and an average of 70 microns for surfaces witha Bucciat finish.

RAL STANDARD

All standard RAL colors do not involve any surcharge in the cost of the furniture you have chosen. Below we offer you just a few examples of the available colors.

RAL DESIGN PLUS

We also have a selection of RAL design colors, the choice of which involves an extra cost compared to the price of the furniture.

WORKTOPS:

Before choosing the ideal material for the different operational worktops, one should ask oneself what are the characteristics of the material that will be most useful to us in the course of daily operations. On the choice of the most suitable top for different needs, certainly weighs the aesthetic component, but this must never ignore the working habits. We provide you below with a brief guide on the characteristics and maintenance necessary for each of the materials we use for the realization of our worktops.

PLASTIC LAMINATE

Perhaps it is the most common and economical, it is characterized by its durability, resistance to scratches, stains, impact and abrasion and for the myriad of different colors and finishes available. Care must be taken not to place hot objects on them and take care of any water infiltration in the joints, it is easily cleaned with a cloth, with a sponge wet with detergent liquid, to avoid very abrasive products.

CORIAN

It is a solid, homogeneous material, composed of 1/3 of acrylic resins (polymethyl methacrylate) and 2/3 of natural minerals consisting mainly of aluminum tridate obtained from bauxite. It has proven to be a material of easy maintenance and great durability: it does not flake, it is able to withstand most shocks, scratches and cuts, it is not porous, compact in all thickness and can be installed with imperceptible joints that make the surface hygienic as certified by the NSF and the LGA body. It does not allow the growth of fungi and batteries its hygienic characteristics are certified according to the international standard DINENISO846. Corian is an inert and non-toxic material, exposed to normal temperatures does not release gas.

STRATIFIED HPL

HPL (high-pressure laminate) is a compact high-pressure laminate. To manufacture it, several layers of recycled kraft paper or wood fiber (70%), impregnated with phenolic resin (30%) are stacked. This plastic resin is thermosetting. In particular, it is a combination of phenolic resins with a reduced rate of formaldehyde (lower than the amount established by European standards), HPL is therefore chemically inert. The result is a plate, very hard and with a high density, which resists the attacks of time, non-porous and capable of eliminating the damage caused by water, oils and steam. Finally, a last sheet of decorative paper is placed that will be covered with a protective layer. Also available with FENIX finish.

STAINLESS STEEL

An elegant material with a remarkable visual and technological impact, particularly hygienic and resistant. It is possible, however, that in everyday use the surface can be scratched so it is advisable not to drag objects on the surface and not to use metal scourers. To keep it in good condition for a long time it is recommended to use a neutral detergent by rubbing with a sponge of synthetic material in the direction of satin finishing and dry with a soft cloth. For the most stubborn stains you can use warm white vinegar or denatured alcohol, rinsing with plenty of water. Also be careful not to leave it in contact with ferrous substances for a long time, they could cause oxidation and rust stains.