Fast Protec Support
Articulator and Verticulator
Working on magnetic condyles, the Fast Protec Articulator perfectly simulates protrusive and lateral occlusion movements. This articulator will allow you maximum visibility thanks to its posterior incisal guide pin and the possibility to set the model on it just using the Fast Clean Base and silicone instead of plaster.
Combined Verticulator and Articulator in one unit just changing the lid. A flexible instrument to enable different processing in record time. Thanks to its posterior incisal guide pin and its magnetic condyles, Verarte allows you a 360° visibility and a perfect simulation of the natural mouth movements.
Verticulator and Flask All-In one. The three-axis Verticulator enables different processing as dentures, implant dentures, and ceramic molding, facilitating the work and allowing you a wide visibility. It is extremely useful for visualizing the case and to ease the casework planning. Simply by placing the Flask lid through magnetic attachment to the lid of the Verticulator, you will be able to finalize a full denture either through the injection or the pouring technique.
Easy Bar System
Step by Step Instructions
Easy bar is a kit of preformed bars that facilitate the realization of a stable, precise and reinforced structure for all kind of fixed dental prosthetics in just 6 hours. Thanks to their different sizes (from 6 to 30 mm), these bars could be adapted by bending to any position of the implants and are compatible to every implant abutment on the market. Available in stainless steel or titanium.
- 245 Preformed bars made of stainless steel
- Available in 49 different sizes (from 6mm up to 30 mm considering center to center distance)
- 1.5 mm thickness
- They can be adapted by bending to the different positions of the implants
01. Implant denture model
02. Control of the bar position (previously fixed in mouth)
03. Model set on Articulator
04. Easy Bar structure welded
05. Easy Bar structure cemented on the abutments
06. Mounting of the teeth
07. Silicone templates
08. Opacified structure
09. Teeth insertion
10. Injection of the resin
11. Final result
Alu Big Flask
45 Minute Dewnture with Buildup
Add sprue formers for access holes.
Enclose the model in the Alu-Big.
Mold Precision Blue onto model with out leaving any gaps or cracks in between silicone and model.
After molding /Fast Putty over Fast Precision Blue, insert top flask over Fast Putty for a sealed tight fit. Wait for 5 minutes.
Remove sprue pins.
Using a brush apply acrylic onto teeth for maximum bond.
Pour acrylic into access hole slowly until it pours out second hole.
Cut sprues and polish.
Duplicate Flask for Temporaries
Implant box is a flask with a minimal and compact design that allows you to cast the model in plaster directly on the base. Thanks to the integrated split cast it is possible to perfectly fit the base on Fast Protec Articulator, Verarte and All-In. It is provided with two tips: the metallic one is useful to perform crown and bridges and implant dentures whereas the clear one is perfect to work with light-curing composites.
Big and Small Glass
Big and Small Glass
Its compact shape, makes the Small Glass the ideal flask to realize works from 1 to 6 elements. Thanks to its additional lid, this flask allows technicians to perform implant dentures, joining the advantages of the Small Glass with those of the Light Glass, reducing any waste of Silicone and working on teeth and gingiva.
Wider than traditional transparent flasks and more stable with its three screws, Light Glass allows dental technicians to perform full implant dentures working simultaneously on composite teeth and gingiva thanks to the provided three lids and the removable three pins. Its completely clear structure guarantees a fast and total light-curing of the elements obtaining perfect and precise details.
New Light Box is a compact and modern polymerization unit provided with last generation multi-die LEDs for light-curing composite resins. A low consumption machine that works on a vacuum pump to avoid the dispersion layer, the New Light Box is perfect to light-cure the Fast Protec wide range of composites at a wave frequency between 360 and 520 nm.
Silicones and Resins
Fast Protec: Silicones
Fast Protec® Silicones have an excellent dimensional stability and an extremely precise detail reproduction without distortion even at high temperatures. Additional silicones for the first and second templates, transparent silicones for composite processing and silicones in cartridge to reproduce the tooth stump: everything you need for all your daily work.
Fast Protec: Resins
Fast Protec® A wide range of cold curing resins for the injection or pouring techniques. Different colors but the same stability and no shrinkage to meet all your needs: full and partial dentures, repairs, relinings, temporaries and even more.
Download MSDS Information for Acrylic Fast Powder Micro Pearl Pink
Download MSDS Information for Acrylic Fast Powder Micro Pearl Veined
Download MSDS Information for Acrylic Fast Powder Micro Pink
Download MSDS Information for Acrylic Fast Powder Micro Pearl Clear
Fast Protec: Techniques
Full Denture Step by Step
Time Comparisons: 45 minutes with Fast Protec® vs. 90 minutes with traditional systems.
01. Occlusion control on the Articulator
02. Model set on the All-In
03. First template
04. Second template
05. Opening of the muffle
06. Degreasing of the teeth
07. Resin pouring
08. Opening of the muffle
10.Final result after polishing
Porcelain Build-up Technique
Time Comparisons: 5 hours with Fast Protec® vs. 10 hours with traditional systems.
02. Articulation setting
03. Work on All-In
05. Check of space on All-In
06. Lingual vision on Base for Temp
07. Ceramic moulding on All-In
09. First cooking
10. Enamel stratification
11. Finished work in antagonism
12. Finished work
Time Comparisons: 40 minutes with Fast Protec® vs. 60 minutes with traditional systems.
01.Model set on Articulator
02. Silicone templates on Implant Box
03.Opening of the muffle
04.All-In with the Fast Temp base
05.Check of the stump reduction on the All-In
06. Reduction of the model teeth
06. Reduction of the model teeth
08.Preparation of the two holes for the injection
10.Opening of the Implant Box