RED & WHITE AESTHETIC SET

RED & WHITE AESTHETIC SET

CREA LIGN PASTE LIGHT GUM 3 g

CREA LIGN PASTE LIGHT GUM 3 g

CHIPPING REPAIR KIT - DENTAL TECHNOLOGY

Includes the following items:

  • 1 x MKZ Primer
  • 1 x MKZ EM Activator
  • 1 x K Primer
  • 1 x VisioLink PMMA & Composite Primer
  • 12 x Plastic Bowls
$639.85
Availability: In stock
SKU
CLIGNSETT1
  • Buy 6 for $575.87 each and save 10%
  • Buy 12 for $543.87 each and save 15%
  • Buy 24 for $511.88 each and save 20%

Includes the following items:

  • 12 x Plastic Bowls
  • 1 x MKZ Primer
  • 1 x MKZ EM Activator
  • 1 x K Primer
  • 1 x VisioLink PMMA & Composite Primer

Instructions:

1.Chipping within the ceramic veneer ( no substructure material )

  1. Remove contamination on the surface (plaque accumulation/discoloration)
  2. Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
  3. Apply K-Primer generously, the surface may appear wet.
  4. Wait approximately 15 seconds until the surface is dry.
  5. Apply the matching shade of Crea.Lign [Dentin/Incisal]
  6. Remove inhibition layer [e.g with alcohol]
  7. Polish the repaired area in two steps [prepolishing and high gloss polishing]

2. Chipping down to the substructure material (the substructure is visible)

  1. Remove contamination on the surface [plaque accumulation/discoloration].
  2. Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
  3. IF the opaquer has remained on the substructure, do not remove it and roughen it as well.
  4. Apply a copious amount of MKZ Primer to the metal and Opaquer Z can be used for colored zirconium substructures. Then polymerize with a halogen or LED lamp.
  5. Apply the matching shade of Crea.Lign Dentin and Incisal using intermediate polymerization of the various layers.
  6. Remove inhibition layer [e.g. with alcohol]
  7. Polish the repaired area in two steps [prepolishing and high gloss polishing]

In cases of chipping down to the substructure, MKZ EM-Aktivator needs to be mixed with MKZ Primer (1:1) and applied to the metal and the adjacent ceramic.

More Information
Unite of Measure PCS
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account