CHIPPING REPAIR KIT

Chipping cases
Easily & Simply repaired

• Primer can be used in combination with all prosthetic materials
• crea.lign Incisal and Dentin materials (in A2 and A3 for masking 80 % of all cases)
• Just one Chipping Repair Kit for 100 treatments
• No hydrofluoric acid required
• includes crea.lign composites in the shades A2/A3 including 4 primers and consumables

$1,307.30

Availability: In stock

SKU

CLIGNSETA

Buy 6 for $1,176.57 each and save 10%
Buy 12 for $1,111.21 each and save 15%
Buy 24 for $1,045.84 each and save 20%

Details

Chipping cases - Easily & Simply repaired

includes the following items:

1 x CreaLign Paste Dentin A1
1 x CreaLign Paste Dentin A2
1 x ComboLign Opaquer 1
1 x ComboLign Opaquer 2
1 x ComboLign Opaquer Z
10 x Application Cannulas
12 x Plastic Bowls

1 x MKZ Primer
1 x MKZ EM Activator
1 x K Primer
1 x VisioLink PMMA & Composite Primer
1 x CreaLign Incisal E1
1 x CreaLign Dentin A1
1 x CreaLign Dentin A2

Instructions:

1.Chipping within the ceramic veneer ( no substructure material )

Remove contamination on the surface (plaque accumulation/discoloration)
Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
Apply K-Primer generously, the surface may appear wet.
Wait approximately 15 seconds until the surface is dry.
Apply the matching shade of Crea.Lign [Dentin/Incisal]
Remove inhibition layer [e.g with alcohol]
Polish the repaired area in two steps [prepolishing and high gloss polishing]

2. Chipping down to the substructure material (the substructure is visible)

Remove contamination on the surface [plaque accumulation/discoloration].
Use a coarse diamond tool to roughen the surface to be repaired [without water cooling] or sandblast. DO NOT rinse with water or clean with steam.
IF the opaquer has remained on the substructure, do not remove it and roughen it as well.
Apply a copious amount of MKZ Primer to the metal and Opaquer Z can be used for colored zirconium substructures. Then polymerize with a halogen or LED lamp.
Apply the matching shade of Crea.Lign Dentin and Incisal using intermediate polymerization of the various layers.
Remove inhibition layer [e.g. with alcohol]
Polish the repaired area in two steps [prepolishing and high gloss polishing]